wholesale jewelry in new york city What is the step of the gift boxing box?

wholesale burlap jewelry displays Handmade gift boxes are roughly divided into: book type box (also known as bag), heaven and earth blocks (also known as upper and lower buckle boxes), and different type boxes. rn书型礼品盒（包式礼品盒）制作流程：rn1.确定设计稿2.确认样品，下单生产3.调度生产材料（面纸、围子、内贴、底纸、 Cardboard or density board, inner support material, etc.) 4. Printing bags and inside stickers (need to print handbags with supporting handbags) 5. Select some processes such as concave, mold cutting as needed) 6. Box opening: a. Paper, printed paper, inside stickers, panels, fences, and inner trunk cutting machines with gray cardboard materials are cut as established as established as established as established. Size (density board needs to be opened with professional large saws) b. Panel processing: V groove machine opening V slice, sticky iron C. Panel machining After the board needs to cut the ash board, stick the tailored silk cloth. Inner support for the foam need to stab the tailored silk cloth on the forming foam 7. Monopoly paper (that is, the panel bag should be scraped, By the side), stickers inside, mount a fence (at the same time you need to put magnets). 8. The box assembly (you can choose the gel method according to the material: the gel and the glue of the gel gun are assembled on the fence. Pay attention to keep the box clean when assembling to avoid leakage of glue.) 9. Paste the bottom paper as needed. (Pay attention to keeping the box clean) 10. Put the inner bent (the internal bearing in the upper and lower asymmetry should be distinguished) 11. Wipe the box and install it (the box production process takes a period of time. The box is closed)
The production process of the sky built box (upper and lower block):
The difference between the production of the box and the book -type box is: The upper, back face, bottom, panels wrap the fence and form the box, hence the name bag.
The heaven and earth cover box, the upper cover is separated from the bottom (except for the upper and lower lids of the conjoined body). There are some differences in the production method: 1. The plate is fixed and dried in white latex. (The upper and lower lids of the gray cardboard material can be opened "well" V slice, and the tape is fixed directly after removing the four corners.) 2. Create the process of processing paper on the upper cover and bottom. 3. The assembly of the upper lid and the bottom bottom is completed (the upper and lower cover box needs to be connected to the upper and lower lids with the connection of the upper and lower lids). 4. Put the inner bent, wipe the box, pack.

sunshine wholesale jewelry los angeles ca Printing, gift boxes are only printed packets, and paper mounting paper will not be printed. At most, it is only dyeing. Because the gift box is an outer packaging box, the printing requirements are very high. The disadvantages of aesthetics.
Surface treatment. The packets of gift boxes are usually for surface treatment. Common is too much light glue, dumb glue, UV, too much oil, too dumb oil.
beer, beer, beer, beer, beer, beer, beer It is a more important part of the printing process. If you want to be beer, you must be a knife mold. If the beer is not allowed, the beer is partial, and the beer continuously affects the subsequent processing.
. Beer, only gift boxes are first beer and then mounted. One is to be afraid of getting flower bags, and the other is that the gift box pays attention to the overall beauty. The gift box mounting paper must be handmade to reach a certain beauty.