1 thought on “What should I do if the gold is washed by the laundry solution”
Henry
Clean it again. Gold cleaning method: 1, mix with 50ml of water, 5g soda, 2g of salt 2g, put the gold jewelry to be cleaned for 1 hour, take out with water and rinse, and then dry it. 2. Use a cotton swab to dip some flower and wipe the golden jewelry. 3, the same proportion of salt and vinegar, scrub it with wet cloth. 4. Dip toothpaste with a toothbrush. Use a small toothbrush to dip some toothpaste, wash the gold jewelry, and then rinse it with water to restore the gloss as new; you must think of a dead ends with a small toothpick, otherwise it will be dirty Housework is easy to stick to dirty things. 5, scrubbing with the hot rice soup or the remaining rice water in the home, soak a soaked jewelry, not only soak the dirty things, but also increase the brightness. 6. If there is a layer of black film on the surface of the jewelry, you need to use a professional metal cleaning solution. You can use 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, and place the gold jewelry together on the gold jewelry. In the cleaning agent, take it out for 1-2 hours, clean it with water, and dry the water. The maintenance method: 1. If there is a layer of black film on the surface of the jewelry, you need to use a professional metal cleaning solution. You can use 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, and exchanged at it. Together, put the golden jewelry in the cleaning agent. After 1-2 hours, take it out and wash it with water. 2. When washing the gold jewelry, put the gold jewelry in the container, add water to the container, and then add a small amount of ammonia water. Then the mouth is tightly covered, then removed hard back and forth. , Also deal with the buckle switch for maintenance. 3. Because some of the trace containing mercury (mercury) in the commercially available cosmetics, such as freckle creams often have phenyl hydroxyl mercury and two mercury chloride. At this time, do not scrape or sandpaper with a small knife. As long as the white spots or white jewelry appear in the fire, and then wipe it with a soft cloth, the gold jewelry will restore the original luster. 4, after the surface of the gold jewelry is stained with dirt, it will make the color dim. At this time, you can use the flushing photos to flush the warm water of 30-40-c into a display solution, and double the water to dilute it. After soaking the gold jewelry with dirt for 4-6 minutes, use a soft brush to remove the dirt and rinse with water several times. 5, first take 1000 ml of warm boiling water (40-C), add 200 ml of methamphetamine to make a water solution, then put the gold jewelry into this cleaning solution for 10 minutes, then brush it with a brush, and rinse it with water. Yu Jing. Put it in the box when you don't wear gold jewelry. Don't put it with other metals. This is easy to wear.
Clean it again.
Gold cleaning method:
1, mix with 50ml of water, 5g soda, 2g of salt 2g, put the gold jewelry to be cleaned for 1 hour, take out with water and rinse, and then dry it.
2. Use a cotton swab to dip some flower and wipe the golden jewelry.
3, the same proportion of salt and vinegar, scrub it with wet cloth.
4. Dip toothpaste with a toothbrush. Use a small toothbrush to dip some toothpaste, wash the gold jewelry, and then rinse it with water to restore the gloss as new; you must think of a dead ends with a small toothpick, otherwise it will be dirty Housework is easy to stick to dirty things.
5, scrubbing with the hot rice soup or the remaining rice water in the home, soak a soaked jewelry, not only soak the dirty things, but also increase the brightness.
6. If there is a layer of black film on the surface of the jewelry, you need to use a professional metal cleaning solution. You can use 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, and place the gold jewelry together on the gold jewelry. In the cleaning agent, take it out for 1-2 hours, clean it with water, and dry the water.
The maintenance method:
1. If there is a layer of black film on the surface of the jewelry, you need to use a professional metal cleaning solution. You can use 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, and exchanged at it. Together, put the golden jewelry in the cleaning agent. After 1-2 hours, take it out and wash it with water.
2. When washing the gold jewelry, put the gold jewelry in the container, add water to the container, and then add a small amount of ammonia water. Then the mouth is tightly covered, then removed hard back and forth. , Also deal with the buckle switch for maintenance.
3. Because some of the trace containing mercury (mercury) in the commercially available cosmetics, such as freckle creams often have phenyl hydroxyl mercury and two mercury chloride. At this time, do not scrape or sandpaper with a small knife. As long as the white spots or white jewelry appear in the fire, and then wipe it with a soft cloth, the gold jewelry will restore the original luster.
4, after the surface of the gold jewelry is stained with dirt, it will make the color dim. At this time, you can use the flushing photos to flush the warm water of 30-40-c into a display solution, and double the water to dilute it. After soaking the gold jewelry with dirt for 4-6 minutes, use a soft brush to remove the dirt and rinse with water several times.
5, first take 1000 ml of warm boiling water (40-C), add 200 ml of methamphetamine to make a water solution, then put the gold jewelry into this cleaning solution for 10 minutes, then brush it with a brush, and rinse it with water. Yu Jing. Put it in the box when you don't wear gold jewelry. Don't put it with other metals. This is easy to wear.