5 thoughts on “How to clean platinum jewelry with diamonds?”

  1. Teach you how to clean diamond rings. The maintenance of diamonds and their accessories mainly focuses on the following points:
    1. Although diamonds are the hardest material in the world, they are difficult to be carved by any other material. However, diamonds have complete octahedral cleavage, and their toughness (anti breakage ability) is not high. It is easy to be damaged by strong collision. Therefore, the most important thing to protect diamonds is to prevent the impact of hard objects or external forces. Diamond jewelry is not suitable for sports, heavy work or cooking
    2. Diamonds are lipophilic, that is, diamonds will absorb skin or foreign oil (including some cosmetics) and affect their brightness after wearing for a long time. A clean diamond with poor quality will look more eye-catching than an unclean high-quality diamond. Therefore, keeping diamonds clean is a secret to make diamond rings more colorful. The simpler method is:
    detergent bath method: this method first immerses the diamond in a small plate of warm water with detergent, then gently washes the diamond with a soft cloth or soft brush, then puts the diamond on the filter screen and rinses it with warm water, and finally uses a cloth to absorb the water
    cold water immersion method: this method uses half a cup of domestic amonia water or sprinkling essence, adds the same volume of clean water, immerses the diamond in the solution, gently stirs it, takes it out and uses paper to absorb the water. Amoniac water also makes metal ring torsos (especially gold) brighter. The advantage of sprinkling essence is that it volatilizes quickly, so that no water drops are left on the diamond surface
    quick immersion method: this method will buy a set of gem cleaning solution and wash diamonds according to the instructions. This method is most suitable
    ultrasonic cleaning: this method uses a special ultrasonic cleaning instrument, which is simple and easy to operate, but it requires certain funds for purchase
    3. The following points should be paid attention to in the care of diamonds:
    first, when doing housework, do not let diamond jewelry be stained with bleach, soap, dairy products and stains. Although they do not damage diamonds, they will make the metal holders fade or produce spots, and sometimes affect the brilliance of diamond jewelry and make it dim
    Second, do not store multiple pieces of diamond jewelry at the same time, because when the diamond jewelry rubs against each other, it will scratch the inlaid metal. Sometimes, when the diamond scratches the diamond, it will scratch the diamond itself
    Third, when cleaning the diamond ring with the above method, you should also pay attention to the following points:
    (1) sprinkling essence and amonia will corrode some gemstones. Therefore, if the diamond ring is inlaid with other gemstones at the same time, you must use these solutions carefully, and it is better to consult relevant experts in advance
    (2) it is not allowed to clean the filled diamonds with acid solution or amonia, which will dissolve or fade the filled diamonds
    (3) do not clean the diamond ring with a solution containing chlorine, which will corrode the gold containing alloy. Therefore, do not wear a diamond ring when swimming in the swimming pool
    (4) when cleaning a diamond ring with an ultrasonic cleaner, attention should be paid to avoiding the use of cracked diamonds, so as to avoid the breakage of diamonds under the vibration of ultrasonic waves
    (5) if the diamond ring has not been cleaned for a long time, it will take a long time to clean the diamond ring with the above methods. Therefore, it is necessary to clean the diamond ring regularly. If you wear a diamond ring every day, you'd better wash it once a week, at least once every two weeks
    transferred from: diamond ring house

  2. Cleaning method of platinum jewelry with diamond:
    1. Clean it with toothpaste or detergent. Just squeeze an appropriate amount of toothpaste on soft towels and other fabrics, spread it evenly, and then gently wipe it back and forth on platinum jewelry, so as to remove the long-term accumulated dirt and sweat on the surface
    2. Use diluted detergent [neutral], and finally rinse with pure water or clean water; You can also wrap the jewelry evenly with toothpaste. After about 10 minutes, remove the toothpaste and wash it with warm water. After cleaning, the jewelry regained its bright luster
    3. Use professional developer powder (sold in all photographic equipment stores). Put a small amount of developer powder in the vessel, stir it evenly with water until it is completely melted, soak the platinum jewelry in it for more than 5 minutes, and finally rinse it with water for several times and dry it.

  3. When you do housework, don't let the diamond you wear be stained with oil or bleach. Oil will affect the luster of the diamond; Bleach will stain the metal. 2. Diamond ornaments should not be worn for heavy work. Although diamonds are hard and wear-resistant, they may also be damaged if they are hit hard according to their grain direction. 3. Do not put the diamond ornaments together with other jewelry in the drawer or jewelry box, because the diamonds will scratch other jewelry when rubbing. At the same time, platinum jewelry should not be worn at the same time as gold jewelry, because gold is soft. If it rubs against each other, it will not only damage gold jewelry, but also dye gold on platinum, making it yellow and difficult to remove. 4. Every year, platinum jewelry is sent to the jewelry store for inspection to check whether the diamonds and inlays are loose and worn, so that they can be repaired in time. 5. Diamonds have adhesiveness to oil, and diamonds stuck with skin oil, cosmetics and kitchen oil will lose luster, so they should be cleaned once a month. The cleaning method is: immerse the platinum jewelry in the jewelry cleaning solution for about 5 minutes, take it out, gently brush the diamond with a small toothbrush, then put it on the filter screen, wash it with water, and finally use a soft cloth to absorb the water.

Leave a Comment